Skip to content Skip to sidebar Skip to footer
Página inicial / How Do I Make My Slime White Again

How Do I Make My Slime White Again

Postar um comentário

Download Article

Download Article

Clear slime is fun and easy to make at home with a few simple ingredients. You can whip up your own batch of clear slime in just a few minutes and play with it immediately! If you want your slime to be absolutely clear, just like glass, you'll need to store it in an airtight container for a few days before you start playing with it.

Ingredients

  • 1⁄2 cup (120 ml) of clear PVA glue
  • 1⁄2 cup (120 ml) of warm water
  • 1⁄2 cup (120 ml) of room-temperature water
  • 1/4 teaspoon (1 gram) of Borax powder
  • 1 cup (240 ml) of clear PVA glue
  • 1 cup (240 ml) of water
  • 2 tablespoons (30 ml) of contact lens saline solution
  • 1 tablespoon (14 grams) of baking soda

  1. 1

    Combine the clear glue and room-temperature water in a large bowl. Measure out 1⁄2 cup (120 ml) of clear PVA glue and dump it in a bowl. Then, measure out 1⁄2 cup (120 ml) of room-temperature water from the tap. Add the water to the glue and stir them together.[1]

    • You can use a spoon, spatula, or craft stick for stirring.
    • If you want to double the recipe, use 1 cup (240 ml) of clear PVA glue and 1 cup (240 ml) of room temperature water.

  2. 2

    Mix the Borax powder and warm water together in a separate bowl. Measure out 1/4 teaspoon (1 gram) of Borax powder and put it in another bowl. Then, measure out 1 cup (240 ml) of warm water and add it to the bowl with the Borax. Stir the ingredients until the Borax powder dissolves.[2]

    • The Borax mixture will look a bit cloudy, but don't worry! The slime will be clear.
    • If you're creating a double batch, use 1/2 teaspoon (2 grams) of Borax powder.

    Safety Tip: Wear plastic gloves when working with undiluted Borax, since it can cause burns. Borax should never be inhaled or come into contact with your eyes, nose, or mouth.

    Advertisement

  3. 3

    Combine the glue mixture and the Borax solution. Pour the Borax solution into the large bowl with the glue mixture. The mixture will start taking on a slime-like texture right away. Stir the ingredients with a spoon to mix them together.[3]

  4. 4

    Keep stirring the mixture until all of the liquid is absorbed. You'll know the slime is ready when there's no more liquid left in the bowl. It can take a few minutes for the liquid to absorb completely, so be sure to keep stirring![4]

  5. 5

    Knead the slime until it reaches your preferred consistency. Use your hands to squish and push down on the slime mixture repeatedly. Keep kneading the slime for several minutes until the consistency is exactly how you want it.[5]

    • The longer you knead the slime, the more rubbery it will become.
    • You can leave the slime in the bowl while you knead it.
    • The slime will have a few air bubbles in it at this point, which is totally normal!

  6. 6

    Play with your slime or store it in an airtight container until it gets clear. At this point, your slime is ready to play with! If you want the air bubbles to go away so that the slime is crystal clear and looks like glass, don't play with it yet. Transfer it to a plastic zipper baggie or container with an airtight lid and let it sit for 1-2 days.[6]

    • The longer you leave the slime in the container, the clearer it will become.
    • Be sure to wash your hands before and after playing with the slime to keep it looking clear.
    • The slime will last several weeks if you store it in an airtight container. Toss it out and make a new batch when it gets cloudy or dirty!

    Advertisement

  1. 1

    Put the clear glue into a large bowl. Measure out 1 cup (240 ml) of clear PVA glue and pour it into a large bowl. You can set this bowl aside for now.[7]

    • Make sure you're using clear PVA glue for this, not white school glue!

  2. 2

    Combine the water and baking soda in a separate bowl. Measure out 1 cup (240 ml) of water and pour it into a bowl. Add 1 tablespoon (14 grams) of baking soda to the bowl. Stir the ingredients until the baking soda dissolves completely.[8]

  3. 3

    Pour the baking soda solution into the bowl with the glue. Add the baking soda solution to the glue slowly so that the ingredients are easy to mix together. Stir continuously as you pour in the baking soda solution. Keep stirring until the ingredients are completely mixed together.[9]

  4. 4

    Stir 2 tablespoons (30 ml) of saline solution into the mixture. Measure out the contact lens saline solution and dump it into the large bowl. Keep stirring until the saline solution is fully mixed into the other ingredients.[10]

    • The saline in contact lens solution is what "activates" the slime and creates the gooey texture!
    • The mixture will be thick and gel-like at this point.

  5. 5

    Knead the slime with your hands until the liquid is absorbed. You can leave the slime in the bowl for this part! Just use your fingers to squish the slime mixture around for several minutes.[11]

    • The longer you knead the slime, the thicker it will get.

    Tip: For a cool effect, you can knead about 1 tablespoon (14 grams) of your favorite glitter into the slime. You can add more or less glitter than that to get different looks—it's totally up to you!

  6. 6

    Play with the slime or store it in an airtight container. Your slime is ready to be played with, but it probably won't look crystal clear. If you want the slime to be absolutely clear, like glass, transfer it to an airtight container and let it sit for 3-5 days before playing with it.

    • The longer you leave the slime in the container before playing with it, the clearer it will look.
    • As long as you store your slime properly in a plastic baggie or airtight container after playing with it, it should last for several weeks!
    • Throw away the slime once it starts looking dirty or cloudy.

    Advertisement

Add New Question

  • Question

    Can I microwave the clear slime to make it instant clear slime?

    wikiHow Staff Editor

    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

    wikiHow Staff Editor

    wikiHow Staff Editor

    Staff Answer

  • Question

    My clear slime looks white from all the bubbles. How do I make it 100% clear?

    Community Answer

    To make it 100% clear, you have to let the slime sit for 5-7 days. While it sits, you cannot touch it.

  • Question

    How much baking soda do I need?

    Community Answer

    Start with one teaspoon, then add more if necessary.

  • Question

    How do I make my slime less sticky?

    Howto5263

    Howto5263

    Community Answer

    Put your slime in a bowl, then add a little bit of saline solution and start playing with it. Try not to add too much, though, or your slime will turn stringy.

  • Question

    How long will it take to be crystal clear?

    Community Answer

    It will take about three days, but be sure to keep it in a container until then.

  • Question

    Can I use baking powder instead of baking soda?

    Community Answer

    No. People often mix up baking powder for baking soda. This is a common mistake. Make sure that it is baking soda.

  • Question

    Does it matter if you use Craz Art or Elmer's?

    Sapphire

    Sapphire

    Community Answer

    No. It is still glue, only a different brand. You could use any of those. People buy the one they want.

  • Question

    How much water do I need?

    Community Answer

    You'll need one cup and two tablespoons (separate from the cup) of water if you're using borax, and 200 milliliters of hot water and 60 milliliters of room-temperature water (separate from the 200 ml.) if you aren't using borax. Make sure to keep the two amounts separate as they are added at different times.

  • Question

    How do you make slime stop smelling bad?

    Community Answer

    You can put fragrance on it, and it will be smelling better than it was before.

  • Question

    Can I use 9oz instead of 4oz?

    Community Answer

    You can use any quantity of glue you prefer, just make sure to adjust the ratio of all the other ingredients while making the slime.

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

VideoRead Video Transcript

  • Wash your hands before making clear slime so that it will look more clear.

  • Try adding small toys, glitter, or beads to your slime for a creative look.

Thanks for submitting a tip for review!

Advertisement

  • Be careful working with Borax. Wear gloves or have an adult help you.

  • Store it in an airtight container to keep it from getting messy and all over the place.

Advertisement

Things You'll Need

  • Large bowl
  • Medium bowl
  • Spoon
  • Airtight container or plastic baggie

About This Article

Article Summary X

To make clear slime, start by mixing 1/2 teaspoon (4 grams) of borax with 1 cup (240 milliliters) of hot water. Then, in a separate bowl, add 1/2 a cup (120 milliliters) of clear glue. Next, stir 2 tablespoons (30 milliliters) of room temperature water into the glue. Now, add 3 teaspoons (15 milliliters) of the borax solution to the glue mixture, and stir everything thoroughly. Finally, knead the slime together with your hands. If you want to make the slime less sticky, you can add a bit more borax solution. Alternatively, if you want to make the slime softer, try adding a little more glue!

Did this summary help you?

Thanks to all authors for creating a page that has been read 224,384 times.

Did this article help you?

diazhadid1948.blogspot.com

Source: https://www.wikihow.com/Make-Clear-Slime

Postar um comentário for "How Do I Make My Slime White Again"